System: Fuel & Air Metering · Standard: SAE J2012 generic code · Severity: Low urgency
No immediate safety risk. Monitor it and fix it at the next service, but do not ignore it indefinitely.
The MAP sensor shares its vacuum source with several other systems, so a leaking hose causes multiple odd codes.
Start by reading every stored and pending code, not just this one. A single fault frequently sets three or four codes at once, and the first one in the freeze-frame data is usually the cause while the rest are consequences.
The manifold absolute pressure sensor reading does not match what the controller expects for the current operating point. Manifold Absolute Pressure Circuit Range/Performance is a generic fuel & air metering code defined by SAE J2012, so it carries the same meaning on every OBD-II vehicle.
Low urgency. No immediate safety risk. Monitor it and fix it at the next service, but do not ignore it indefinitely.
In rough order of how often they turn out to be the problem: Failed MAP sensor; Blocked or leaking vacuum hose to the sensor; Carbon build-up in the intake.
P0100 Mass Air Flow Circuit MalfunctionP0101 Mass Air Flow Circuit Range/PerformanceP0102 Mass Air Flow Circuit Low InputP0103 Mass Air Flow Circuit High InputP0110 Intake Air Temperature Circuit MalfunctionP0112 Intake Air Temperature Circuit Low InputCode number, system and definition follow the SAE J2012 / ISO 15031-6 generic diagnostic trouble code standard. Symptoms, causes and severity are the standard generic diagnostic logic for that fault. This page does not contain manufacturer-specific procedures, part numbers or pricing.